About LAWN
News
Security
Policy

Help
GTwifi
GTother
GTvisitor

Quick Links
Wireless Etiquette
Pre-shared Key
Sponsor Guest
Device Login
LAWN Login API
LAWN Debug Page

Services
Bonjour
Classroom Wireless
Device Registration
eduroam
Printing
Centergy Wireless

Forums


Search

Troubleshooting GTwifi on Mac OS X 10.7

This document will provide some basic GTwifi troubleshooting information for Mac OS X 10.6 (Snow Leopard). This example is assuming you are running Mac OS X 10.6 with a working AirPort card that is turned on.

These are listed in order of difficulty as well as recommended starting places to diagnose where in your configuration there may be issues. You may only need to perform one or two of these in order to resolve your OSX issues.

NOTE: Certain software packages such as Peer Guardian or other network security related software may interfere with basic network connectivity. Temporarily remove these packages, reboot, and attempt to connect again. If you find that your product is interfering with your network connecivity, you may need to find an alternate method to your protect your system. OIT Technology Support may be able to assist you in configuring your product or system.

  1. Turn AirPort off and back on.
  2. Is "GTwifi" at the top of your "Preferred Networks"?
    1. Click the AirPort icon in the upper right hand corner of your menu bar.
    2. Select from the pull down menu "Open Network Preferences..."
    3. Drag "GTwifi" to the very top of the "Preferred Networks" listing on the "AirPort" tab.

  3. Is IPv4 configured for "Using DHCP" and IPv6 "Off" under your "Network Settings" on the "TCP/IP" tab?
    1. Click the AirPort icon in the upper right hand corner of your menu bar.
    2. Select from the pull down menu "Open Network Preferences..."
    3. Click the "TCP/IP" tab.
    4. Make sure "Configure IPv4" has "Using DHCP" selected.
    5. Make sure "Configure IPv6" has "Link-local Only" selected.

  4. Reboot your Mac.
  5. Is AirPort showing other available networks (GTvisitor, GTother)? If not, it could be a hardware issue with your AirPort card.

  6. Are you in an area where "GTwifi" is available? "GTwifi" is available at the same locations as "GTother" and "GTvisitor".
  7. Clean up cluttered network settings:
    1. Open "System Preferences"
    2. Click on "Network"
    3. Click on the padlock if it is locked and authenticate if required to do so.
    4. Click on the "Advanced" button.
    5. Click on "GTwifi" in the preferred Networks list and click the [-] button to remove it.
    6. Turn off AirPort
    7. Open "Keychain Access". You can find where this is by using Spotlight.

    8. In the upper right hand corner of "Keychain Access" application, search for "gt".
    9. Delete any related entries.
    10. Reboot your Mac.
    11. When it boots up again, follow the GTwifi configuration instructions as described here



 
   

This service is provided to authorized clients only.
Unauthorized access to this service is prohibited.

This page last modified: Dec 4, 2013 at 11:40 AM EST
Disclaimer || Contact: